■Placing the speakers

Placing the center speaker (NX-C300)

When placing the center speaker on the top of the TV, use the supplied fasteners to secure the speaker.

Fastener

Peel off the seal

1Peel off the seals on one side of the fasteners and attach them to the bottom of the center speaker.

2Peel off the seals on the other side of the fasteners and attach them to the top of the TV.

Notes

–Do not place the speaker on the TV if the top of the TV is uneven or narrower than the bottom surface of the speaker. Doing so may cause the speaker to fall. In this case, place the speaker inside a TV rack or on a level floor.

–Before attaching the fasteners to the TV, clean the surface with a dry cloth. A dirty or wet surface may weaken the adhesive force and cause the speaker to fall.

–Do not touch the bonding surfaces of the fasteners after peeling off the seals. Doing so may weaken the adhesive force and cause the speaker to fall.

SPEAKER SETUP

Attaching to a wall

You can attach the speakers to a wall using commercially available screws (Diameter: 3.5 to 4 mm (1/8” to 5/32”), Length: 25 mm (1”) or more). Each 2 speaker requires two screws.

Screws

 

PREPARATION

(3.5 (1/8”) to 4 (5/32”)

 

mm dia., commercially

 

available)

 

 

20 mm (25/32”)

5 mm

 

or more

(1/5”)

 

 

 

79 mm

151 mm

(5-15/16”)

(2-3/4”)

–+

– +

1Install two screws in the wall where you want to place the speaker.

2Hang the speaker on the screws using the holes in the rear of the speaker.

Notes

–To attach a speaker to a wall using screws, the wall must be firm. Do not attach a speaker to a wall that is made of weak materials such as plaster or veneered woods. Doing so may cause the speaker to fall.

–After attaching each speaker, check that the speaker is fixed securely. YAMAHA will bear no responsibility for any accidents caused by improper installations.

Hanging on a wall (NX-F300, NX-S300)

You can hang the speakers on a wall using a commercially available bracket and screws (Diameter: 6 mm). Attach a bracket firmly to the rear of the speakers using screws. Then mount a screw on the wall where the speaker is to be hung and hook the speaker securely onto the mounted screws.

Note

Do not use screw threads measured in inches for this installation. Use metric screw threads only.

English

9 En