■Activating XM Satellite Radio
To sign up for an account with the XM Satellite Radio service, an XM Satellite Radio ID number is required. Follow the procedure below to check your ID number, and then visit the website or call
URL:
1Press XM repeatedly until “XM RADIO” appears in the front panel display.
2Press and hold DISPLAY to check the XM Satellite
Radio reception level.
→ “ANTENNA XX” appears (XX: reception level,
0 to 100%).
•Check the XM Satellite Radio reception level and adjust the orientation of XM Passport System for a better percentage of the reception level.
Note
XM® SATELLITE RADIO TUNING
■Basic XM Satellite Radio operations
1Press XM repeatedly until “XM RADIO” appears in the front panel display.
2Press DISPLAY.
→ The XM Satellite Radio information (such as channel number, channel name, category, artist name, or song title) for the currently selected channel appears in the front panel display.
3Search for a channel by using one of the XM Satellite Radio search modes (see page 44).
Notes
–When you select “XM” as the input source, this DVD receiver automatically recalls the previously selected channel.
–The XM Satellite Radio signals can be output at the LINE OUT jacks.
–You can set the XM Satellite Radio preset channels (see page 45).
–You can display the XM Satellite Radio information in the front panel display (see page 45).
4
OPERATION TUNING
If “ANTENNA” appears in the front panel display, the XM Passport System may not be connected to the XM jack on the rear panel of this DVD receiver properly. See “Connecting XM Passport System” on page 41 and check the connection.
3Press CH+ (
)/CH– (
) to select channel “0”. → “RADIO ID” appears in the front panel display for
few seconds, and then the Radio ID number appears.
Note
You cannot select channel “0” if the All Channel Search mode (see page 44) is not selected.
4Check the XM Radio Satellite Radio ID number displayed in the front panel display and write it down.
ID:_____________________________________
English