CONNECTION
■Connecting a TV
Notes
–You only need to make one audio connections from the following options (1 or 2) and one video connection from the following options (1,2 or 3) depending on the capabilities of your TV.
–Do not connect the power cords until all cable connections are completed.
Audio connectionsVideo connections
1 | 2 | 3 | 1 | 2 |
AUDIO | COAXIAL | Pr/Cr Pb/Cb Y | VIDEO | |
OUT | OUT | IN | IN | |
R | L |
|
|
|
TV
| HDMI | XM |
|
|
|
|
| DOCK | PR | Y | VIDEO |
| L | SYSTEM |
|
|
|
GND |
| CONNECTOR | PCM/DTS |
|
|
|
|
|
|
| |
AM | R |
| qDIGITAL |
|
|
|
|
|
|
| |
|
|
|
| PB |
|
ANTENNA | TV IN | AUX IN LINE OUT TO | COAXIAL | COMPONENT S VIDEO | |
|
|
| DIGITAL IN | VIDEO OUT (DVD ONLY) | |
1 VIDEO output jack | 1 TV IN jacks |
Use the supplied video pin cable (yellow) to connect the VIDEO jack of this DVD receiver to the video input jack (or A/V In/Video In/Composite/Baseband jack) of your TV.
2S VIDEO output jack
3COMPONENT VIDEO OUT jacks
Use commercially available component video cables (red/blue/green) to connect the Y PB PR jacks of this DVD receiver to the corresponding component video input jacks (or the Y Pb/Cb Pr/Cr/ YUV jacks) of your TV.
Progressive scan video quality is only available when using Y PB PR in conjunction with a progressive scan TV. To activate the progressive scan function see page 34.
To output TV sound from the speakers connected to this DVD receiver, use commercially available audio cables (white/red) to connect the TV IN input jacks of this DVD receiver to the corresponding audio output jacks of your TV.
2COAXIAL jack
To output TV sound from the speakers connected to this DVD receiver, use a commercially available coaxial cable to connect the COAXIAL input jack of this DVD receiver to the corresponding coaxial output jack of your TV.
Notes
–If you connect this DVD receiver to the analog audio and digital audio at the same time, the digital audio signals input at the COAXIAL jack take priority over the analog audio signals input at the TV IN jacks.
–You can connect this DVD receiver to your TV using an HDMI cable. For details, see “Connecting an HDMI component” on page 13.