TROUBLESHOOTING
Problem | Solution | |
|
| |
A source cannot be recorded by an analog | Connect the source component to the LINE OUT jacks of the DVD receiver. | |
component connected to the DVD receiver |
| |
|
| |
Sounds played on the AV equipment connected to | Connect those equipment to the DVD receiver with analog connections. | |
the DVD receiver cannot be recorded with external |
| |
recording equipment |
| |
|
| |
The volume does not increase or sounds are | Turn on the power of the component connected to the DVD receiver. | |
distorted |
| |
|
| |
There is no sound from the center, surround | Make sure the center, surround speakers and subwoofer are connected correctly. | |
speakers and subwoofer |
| |
Adjust the volume level in the setup menu. | ||
| ||
|
| |
| Press SURR button to select a correct surround sound setting. | |
|
| |
| Make sure the source you are playing is recorded or broadcast in surround | |
| sound (DTS, Dolby Digital, etc.). | |
|
| |
“SPEAKER ERR” appears in the display panel | Unplug the subwoofer, then make sure the front, center and surround speakers | |
| are connected correctly. | |
|
| |
| Set the DVD receiver to the standby mode, then disconnected the power cord. | |
| Wait for about 30 seconds, then reconnect the power cord and turn on the DVD | |
| receiver. | |
|
| |
Unable to play DivX® movies | Check that the DivX® file was encoded in ‘Home Theater’ mode with a DivX® | |
| 5.x encoder. | |
|
| |
The DVD receiver does not work | Disconnect the power cord from the power outlet for a few minutes. Reconnect | |
| the power cord and try to operate again as usual. | |
|
|
Problem | Solution |
|
|
The remote control does not work for operating | Set the correct remote control code. Depending on the model and year of the |
other equipment | product, the DVD receiver’s remote control may not be able to operate it partly |
| or wholly. In this case, use the remote control supplied with each product. |
|
|
The remote control does not function properly | Select the source (DVD/CD or TUNER, etc.) before pressing the function |
| button (h, b/ a). |
|
|
| Reduce the distance between the remote control and this DVD receiver. |
|
|
| Replace the batteries with new ones. |
|
|