■Turning on the power

IMPORTANT!

Make sure that you have completed all the necessary connections (see page 12).

1Connect the AC power cord to an AC outlet.

2Turn on your TV and set the TV to the correct Video IN channel (e.g. EXT1, EXT2, AV1, AV2, AUDIO/ VIDEO, etc.). Refer to the manual supplied with your TV for details.

3Turn on this DVD receiver.

4Press DVD/CD on the remote control.

→ “DVD/CD” appears in the front panel display and the default screen appears on the TV.

About the auto standby function

This DVD receiver is automatically set to the standby mode when disc playback is stopped or paused for more than 15 minutes.

When “SCREEN SAVER” is set to “ON” (see page 31):

The background is displayed when disc playback is stopped or the paused picture is displayed for 15 minutes.

Background

Example of a

 

paused picture

The screen saver is displayed for 15 minutes.

This DVD receiver is set to the standby mode.

When “SCREEN SAVER” is set to “OFF” (see page 31):

The background or the paused picture is displayed for 30 minutes.

This DVD receiver is set to the standby mode.

GETTING STARTED

■Setting a TV type and display

This DVD receiver is compatible with both NTSC and PAL video formats. Select the color system that matches your TV.

Note

 

2

For details on how to use the OSD menu, see page 29.

PREPARATION

 

VIDEO SETUP PAGE

 

TV TYPE

PAL

 

TV DISPLAY

NTSC

 

PROGRESSIVE

MULTI

 

PICTURE SETTING

 

 

BLACK LEVEL

 

 

CLOSED CAPTION

 

 

HDMI SETUP

 

 

PAL

Select this if the connected TV is a PAL system TV. It will change the video signals of NTSC discs and output them in PAL format.

NTSC

Select this if the connected TV is an NTSC system TV. It will change the video signals of PAL discs and output them in NTSC format.

MULTI

Select this if the connected TV is compatible with both NTSC and PAL formats (such as a multi-system TV). The output format will be in accordance with the video signals of the disc.

Notes

–Before changing the current TV standard setting, ensure that your TV supports the selected TV type.

–If the picture is not displayed properly on your TV, wait for 15 seconds for this DVD receiver to activate automatic recovery.

When changing the color system using the remote control:

1 Press on the front panel to open the disc tray.

2 Press , and then press AUDIO.

→The setting is switched between NTSC and PAL.

English

19 En