HDMI setup

When you have connected this DVD receiver to an HDMI-compatible component via HDMI jack, adjust the following menu items to match the audio output capability of this DVD receiver.

[AUDIO SETUP PAGE] - [HDMI SETUP]

AUDIO SETUP PAGE

SPEAKER SETUP

HDMI SETUP

CD UPSAMPLING

NIGHT MODE

LIP SYNC

HDMI SETUP PAGE

HDMI AUDIO

OFF

LPCM OUTPUT

ALL

 

PCM ONLY

[HDMI AUDIO]

Adjust the audio output depending on the connected component.

OFF

Selects this to turn off the HDMI audio output.

ALL

Select this if you have connected this DVD receiver to a multi-channel decorder or receiver via the HDMI jack of this DVD receiver.

PCM ONLY

Select this if the component you have connected via the HDMI jack is not capable of decording multi- channel audio signals. The audio sampling rate depends on [LPCM OUTPUT] setting.

[LPCM OUTPUT]

Set this if you have connected this DVD receiver to a PCM-compatible component via HDMI jack. Discs are recorded at a certain sampling rate. The higher sampling rate provides the better sound quality.

48KHz

Select this to play back discs recorded at the sampling rate of 48kHz. All 96kHz PCM data streams (if available) are converted to the sampling rate of 48kHz.

96KHz

Select this to play back discs recorded at the sampling rate of 96kHz. If the 96kHz disc is copy protected, the digital output is automatically converted to the sampling rate of 48kHz.

DVD SETUP MENU OPTIONS

CD upsampling

Use this feature to convert your music CD to a higher

 

sampling rate using sophisticated digital signal

 

processing for better sound quality. If you activate the

 

upsampling function, this DVD receiver automatically

 

switches to the stereo mode.

 

3

[AUDIO SETUP PAGE] - [CD UPSAMPLING]

OFF

 

BASIC

Select this to disable CD-upsampling.

 

88.2 kHz (X2)

OPERATION

Select this to convert the sampling rate of CDs to

 

twice that of the original.

 

Notes

 

–This setting is only valid for signals output at the analog jacks.

–If you have activated the upsampling function, this DVD receiver automatically switches to stereo mode.

Night mode

In the night mode, high volume output is softened and low volume output is brought upward to an audible level. It is useful when you watch your favorite action movie without disturbing others at night.

[AUDIO SETUP PAGE] - [NIGHT MODE]

ON

Select this to level out the volume.

OFF

Select this when you want to enjoy the full dynamic range of surround sound.

Note

This function is only available for Dolby Digital.

Lip synchronization

This feature allows you to delay the sound output from the speaker in order to synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.

[AUDIO SETUP PAGE] - [LIP SYNC]

• Press / to adjust the delay time (between 0 ms and 200 ms), and then press ENTER (OK) to confirm your selection.

English

33 En