Notes
•If the screen shifts off center when using progressive output, see “Adjusting the screen position” described below.
•When playing 4:3 aspect software with a 16:9 aspect wide- screen monitor using progressive output, the picture may appear horizontally stretched to fill the screen. In that case, change the aspect to the correct one at your monitor. If the monitor cannot change the aspect, it is recommended to turn the progressive feature off. (The progressive output is switched to the interlace output.)
•When the PROGRESSIVE function is working, video signals are output only from the component video jacks.
■Adjusting the screen position (when using progressive output)
(U.S.A. and Canada models)
With some video monitors, the screen may shift off center with progressive signals output from this unit. To adjust the position, follow the method described below using the remote control.
1Press d to pause play.
2Follow the step 1 on “Operating menu bar” on page 34 to show the video menu.
3Press i to select the rightmost icon (
).
4Adjust the position.
To move to the left, press the numeric button 1. To move to the right, press the numeric button 3.
Example:
Press 3 to move to the right.
•Pressing the numeric button 2 after pressing 1 or 3 sets the screen back to the original position.
•You can check whether the picture is in the center or not by switching to normal output (press PROGRESSIVE so the indicator turns off).
5Save the adjusted position.
First press a and then press SETUP to show setup menu. Then press SETUP once again (or RETURN) and now the position is saved.
USING MULTIPLE FUNCTIONS
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR VIDEO MONITOR COMPATIBILITY WITH THIS MODEL 525P DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
This unit is compatible with YAMAHA digital cinema projector
DVD-Audio features DVD-A 
|
|
|
|
| VIDEO 1 |
|
SHIFT | CODE SET |
|
| CD |
|
|
SHIFT |
|
| DVD | AMP |
| |
| HALL | JAZZ |
| ROCK | ENTERTAINMENT |
|
| 1 | 2 |
| 3 | 4 |
|
|
| SETUP |
| ANGLE | MARKER |
|
| SPORTS MONO MOVIE | MOVIE 1 | MOVIE 2 |
| ||
| 5 | 6 |
| 7 | 8 |
|
|
| PLAY MODE | REPEAT |
| ||
| /DTS | SELECT | MATRIX 6.1 | STEREO | PAGE | |
| 9 | 0 |
| > | CANCEL | |
|
|
| ||||
| LEVEL |
|
| GROUP | PAGE | GROUP |
| SET MENU | MUTE | ||||
| TOP MENU | MENU |
|
| ||
|
| PRESET |
| ABCDE |
|
|
u, d, j, i | CH | ENTER |
| CH |
|
|
/ ENTER |
| PRESET |
|
|
|
|
|
|
|
|
|
| |
| TEST |
| B. BOOST | VOL |
| |
| ON SCREEN | RETURN |
| |||
(U.S.A. model)
■To play a track on a specific group
1Press GROUP while pressing SHIFT.
The group and track icons appear on the video monitor.
2Press the cursor buttons (u, d) to select a group number and press ENTER.
3Press the cursor buttons (u, d) to select a track number and press ENTER.
The selected track starts to play.
y
•You can also use the numeric buttons to select a group and a track.
PLAYING A DISC
English
39
