E

EMU00429*

Emergency Starting Engine

1) Remove the top cowling.

F1008A

F1008B

2) Remove the two bolts holding the flywheel cover.

3) Lift up the rear of flywheel cover and pull it out forward.

F1033

OFF ON START

701024

F1034

4)Prepare the engine for starting. See “STARTING ENGINE” for procedures. Be sure the engine is in Neutral and that the lock plate is attached to the engine stop lanyard switch. The main switch must be “ON”.

5)Insert the knotted end of the emer- gency starter rope into the notch in the flywheel rotor and wind the rope clockwise.

6)Pull the rope slowly until resistance is felt.

7)Remove the rope from the flywheel

temporarily.

8)Rewind the rope approximatery 3/4 of a turn clockwise.

9) Give a strong pull straight out to crank and start the engine. Repeat if necessary.

5-7