E

NOTE:

If a torque wrench is not available when you are installing the drain plug, finger tighten the bolt just until the gasket comes into contact with the surface of the drain hole. Then tighten 1/4 - 1/2 turn. Have the drain plug torqued to the correct value with a torque wrench as soon as possible.

4)Remove the oil filler cap 2. Add the

 

correct amount of oil through the

w

filler hole.

 

Reinstall the filler cap.

 

 

 

Engine oil grade/capacity:

 

Refer to “SPECIFICATIONS”, page 4-1.

 

 

5) Start the engine and watch to make

F1023

sure the low oil pressure warning lamp turns off. Make sure that there are no oil leaks.

cC

If the oil lamp does not turn off, or if there are oil leaks, stop the engine and find the cause. Continued operation with a problem could cause severe engine damage. If the problem cannot be found and corrected, consult your Yamaha deal- er.

4-18