E

F1042

F1026

602051

602036

EMU00388*

CHECKING PROPELLER

1)Remove the 5 screws and the cover.

2)Remove the spark plug caps from the spark plugs.

w

You could be seriously injured if the engine accidentally starts while you are near the propeller.

8Before inspecting, removing or installing the propeller, remove the spark plug caps from the spark plugs. Also, put the shift control in Neutral, put the main switch in the “OFF” position and remove the key, and remove the lanyard from the engine stop switch. Turn off the battery cut-off switch if your boat has one.

8Do not use your hand to hold the propeller when loosening or tightening the propeller nut. Put a wood block between the cavitation plate and the propeller to prevent the propeller from turning.

EMU00390

Propeller Checking Point

8Check each of the propeller blades for wear, erosion from cavitation or ventila- tion, or other damage.

8Check the splines for wear and damage.

8Check for fish line winding around the propeller shaft.

8Check the propeller shaft oil seal for damage.

4-23