UP

DN

E

EMU01125

 

POWER TRIM/TILT SWITCH

 

The power trim/tilt adjusts the motor

 

angle in relation to the transom. The

 

power trim/tilt switch is located on the

 

side of the bottom engine cowling. Push-

 

ing the switch “UP” trims the motor up,

 

then tilts the motor up. Pressing the

 

switch “DN” tilts the motor down and

F1006*

trims the motor down. When the switch

 

button is released, the motor will stop in its current position.

w

Use the power trim/tilt switch located on the bottom engine cowling only when the boat is at a complete stop with the engine off. Attempting to use the cowling -mounted power trim/tilt switch while the boat is moving could increase the risk of falling overboard and could distract the operator, increasing the risk of collision with another boat or an obstacle.

NOTE:

Refer to the section “Adjusting Trim Angle” and “Tilting Up/Down” for instructions on usage.

2-7