E
F1009
F1008A
F1008B
q
000365
EMU00157
TILT SUPPORT LEVER
To keep the outboard motor in the tilted- up position, lock the tilt support lever to the clamp bracket.
EMU00163
TOP COWLING LOCK LEVERS
To remove the engine top cowling, pull up the front and rear lock levers. Then lift off the cowling. When replacing the cowl- ing, check to be sure it fits properly in the rubber seal. Then lock the cowling again by moving the levers downward.
EMU01146
FLUSHING DEVICE
This device 1 is used to clean the cooling water passages of the motor using a garden hose and tap water.
NOTE:
Refer to “Cleaning