E
EMU00209
Controls
8Check throttle, shift, and steering for proper operation before starting the engine.
8The controls should work smoothly, without binding or unusual free play.
8Look for loose or damaged connec- tions.
8Check operation of the starter and stop switches when the outboard motor is in the water.
EMU00210
Engine
8Check the engine and engine mounting.
8Look for loose or damaged fasteners.
8Check the propeller for damage.
EMU01436
q |
|
| CHECKING THE ENGINE OIL LEVEL | ||
1) | Put the outboard motor in an upright | ||||
| |||||
|
|
|
| position (not tilted). | |
| 2) | Pull out the oil dipstick and wipe it | |||
|
|
|
| clean. | |
| 3) | Completely | |||
|
|
|
| pull out it again. | |
|
| 4) | Check the oil level using the dipstick | ||
| 000822 | ||||
|
|
| to be sure the level falls between the | ||
|
|
|
| ||
|
|
|
| upper and lower marks. Fill with oil if | |
|
|
|
| it is below the lower mark, or drain to | |
w e q |
|
|
| the specified level if it is above the | |
|
|
| upper mark. | ||
|
|
| 1 Oil dipstick | ||
|
|
| 2 Lower level mark | ||
|
|
| 3 Upper level mark | ||
| 201012 |
|
|
| |
|
|
|
|
| |