E

EMU01109

Trim Meter

This meter shows the trim angle of your outboard motor.

NOTE:

8Memorize the trim angles that work

001059

best for your boat under different condi- tions. Adjust the trim angle to the desired setting by operating the power trim and tilt switch.

8If the trim angle of your motor exceeds the trim operating range, the top segment on the trim meter display will start to blink.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EMU01620

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hour Meter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This meter shows the number of hours

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the engine has been run. It can be set to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

show the total number of hours or the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

number of hours for the current trip. The

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

display can also be turned on and off.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8Changing the display format

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pressing the MODE button changes the

001088

display format in the following circular

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pattern:

Total hours - Trip hours - Display off

8Resetting the trip hours Simultaneously pressing the SET and MODE buttons for more than 1 second while the trip hours are displayed resets the trip counter to 0 (zero).

NOTE:

The total number of hours the engine has been run cannot be reset.

2-9