E

UP DN

 

 

 

EMU01331

 

 

 

 

Power Trim/Tilt Switch

UP

 

 

The power trim/tilt

adjusts the motor

 

 

angle in relation to

the transom. The

DN

 

 

 

 

 

power trim/tilt switch is located on the

 

 

 

remote control lever grip. Pushing the

 

 

 

switch “UP” trims the motor up, then tilts

 

 

 

the motor up. Pressing the switch “DN”

 

701034*

 

tilts the motor down and trims the motor

 

 

down. When the switch button is

 

 

 

 

 

 

released, the motor will stop in its current

 

 

 

position.

 

 

 

 

NOTE:

 

 

 

 

 

Refer to the sections “ADJUSTING TRIM

 

 

 

ANGLE” and “TILTING UP/DOWN” in

 

 

 

Chapter 3 for instructions on usage.

 

 

 

 

 

 

EMU01155

Throttle Friction Adjusting Screw

A friction device in the remote control box provides adjustable resistance to movement of the remote control lever, and can be set according to operator preference. An adjusting screw is located on the front of the remote control box.

701035

Resistance

Screw

 

Increase

Turn clockwise

 

Decrease

Turn counterclockwise

w

Do not overtighten the friction adjusting screw. If there is too much resistance, it may be difficult to move the lever, which could result in an accident.

2-5