Yamaha MCX-2000 setup guide Notes on Firmware update

Resetting the MCX-2000 for Factory Settings Updating the MCX-2000 Firmware

1From the System Utilities menu, select System Reset.

Notes on Firmware update

When you update the MCX-2000 firmware, be sure to read the document that comes with the firmware update CD. This document contains the latest information on new features and any changes after updating the firmware, other important notices or additional procedure to the following update process.

1Press the OPEN/CLOSE button on the remote control or on the front panel and open the CD tray. Set the firmware update CD with its label side facing up. Press the same button again to close the tray.

nAs shown in the screen, the purpose of resetting the MCX-2000 is to initialize all parameter values. When you reset the MCX-2000, any existing songs, playlists and bookmarks in your music archive are preserved, except for radio presets (initialized to factory settings). The system reset process also initializes the MCX-2000 internal clock, so note that existing timer playback programs are lost and initialized to factory settings. In addition, if you reset the MCX-2000 to reconfigure your MusicCAST network, see “Initializing Network Settings”

(page 100). If you just want to manage your music archive (such as deleting unnecessary songs), see “Editing the Library” (page 75).

2To start resetting the MCX-2000, select Start from the Submenu.

3A confirmation dialog box appears. When you select OK, the “Resetting...” message is shown and the MCX-2000 restarts itself.

Another confirmation dialog box appears, telling that the internal clock and timer has been reset. When you select OK, the MCX-2000 automatically starts the Easy Setup process, showing the same screen shown when you turned on the MCX-2000 for the first time. Configure the MCX-2000 according to your environment, and newly create your MusicCAST network by registering MusicCAST clients (page 27).

STAMDBY/ONPOWER STAMDBY/ON

TV AMP

1 2 3

TIMER OPEN/CLOSE

4 5 6

7 8 9

0

RANDOM REPEAT BROADCA

LIBRALY ARTSTS PLAULISTS

MENU 1 MENU 2 MENU 3

1 2 3 4

Remote control

2From the System Utilities menu, select System Update.

3Update the MCX-2000 firmware according to the message shown in the screen. Normally, update process takes approximately 10 minutes.

nAlong with the MCX-2000 firmware update, you may need firmware update of each MusicCAST client. For details, read the document that comes with the firmware update CD.

MCX-2000 Owner’s Manual

103