Yamaha MCX-2000 Message, Description, Action/Solution, Check Antenna, Updating, No Signal

Also in the Submenu, you can select Direct Access if you know the desired channel number.

Direct Access entry dialog

Specify the desired channel number by pressing the on-screen numeric buttons, followed by OK. Press CLR to clear your entry. Wait for a few seconds until the MCX-2000 automatically tunes in to that channel.

nPressing any buttons other than the numeric buttons cancels Direct Access entry.

Screen Messages for XM Radio

The MCX-2000 may show one of the following messages in the Play Information screen for XM radio. Read each description and handle each situation as recommended.

Message	Description	Action/Solution
CHECK ANTENNA	Your XM Connect-and-Play antenna is not	Check that your XM Connect-and-Play antenna is
	connected, or does not work properly.	properly connected.
UPDATING	The XM user encryption code is being updated.	Wait until the encryption code is completely updated.
NO SIGNAL	The signal is too weak.	Check the XM Connect-and-Play antenna connections
		and position the antenna for the best reception.
LOADING	The audio or text data decoding process takes	Wait until the decoding process is finished.
	longer than four seconds.
OFF AIR	The XM Satellite Radio channel you selected is	Check the channel number or select another XM Satellite
	not currently broadcasting any signal.	Radio channel.
CHANNEL - - -	The channel station ID (SID) is no longer	Check the channel number or select another XM Satellite
- - -	available.	Radio channel.
- - -	No artist name/feature or song/program title is	Artist name is not sometimes available through a satellite
	available.	signal for display.
- - -	No channels are available for the selected	Category name is not sometimes available through a
	category.	satellite signal for display.

58

MCX-2000 Owner’s Manual