Yamaha MCX-2000 setup guide Exit this screen Select this to finish the process

4A list of songs will be shown in white (only when “Ready to record” is shown). If you want, edit the album title and/or artist name for the CD you’re going to create using the following two commands from the Submenu.

Either command opens the character palette. So, you can type necessary text characters using the palette, or using a PS/2 keyboard connected to the MCX-2000 front panel (page 75).

5When you’re ready, start recording by selecting the relevant command from the Submenu. The MCX-2000 writes the songs at 4x speed.

nArchived songs are analog recorded onto a CD-R/RW disc.

6When the CD recording process is finished, the MCX-2000 shows the following dialog box, asking what you want to do next.

Open CD screen: Select this to finish the process, and open the CD song list screen (page 52) to confirm a list of songs on a music CD you’ve just created.

Create another CD-R/RW:Select this if you want to make another CD. The MCX-2000 automatically opens the tray and lets you repeat the above procedure from step 3.

Exit this screen: Select this to finish the process.

nIf you cancel the process or exit the operation screen before proceeding to step 5, you may see songs selected in the last session the next time you open this screen. You can clear them by selecting Clear content from the Submenu. You can easily replace songs by selecting another playlist or album using the Select content command from the Submenu (as in step 3 above).

74

MCX-2000 Owner’s Manual