Yamaha MCX-2000 setup guide Push Select Push Select Push Select Play

3Following the screen message, start Auto Configuration on each client. Use the front-panel cursor controller to select Top Menu > Setup > Network > Auto Configuration, and then press the PLAY button. The clients start searching for the music server (MCX-2000).

PUSH

SELECT

PUSH

SELECT

PUSH

SELECT

PLAY

nYou can use the cursor controller on a client’s front panel in the same way as the cursor controller on the MCX-2000 remote control. Push the center stick upward, downward, leftward or rightward as you press the up, down, left or right arrow button on the remote control. When you press this stick vertically, it works the same as pressing the SELECT button. In addition, you can go back to the previous screen by pushing the stick leftward.

4When you go to the next Easy Setup screen, the MCX-2000 starts searching for any available clients.

nDon’t touch or operate any clients until their IDs appear in the above screen and are successfully registered to the MCX-2000.

12

MCX-2000 Setup Guide