Yamaha Limiting Local Operations on the MCX-2000, 1Setup, 2Edit function, 3Recording

Limiting Local Operations on the MCX-2000

1From the System Utilities menu, select Lock Function. The password entry dialog box appears, prompting you to enter a predefined password. Select OK after entry.

Password entry dialog box

For password entry, use the on-screen character palette or a PS/2 keyboard connected to the MCX-2000 front panel. Each password character will be shown with an asterisk (*).

nWhen you use this function for the first time, enter “mcx-2000” in lowercase (factory setting).

2When you enter a correct password, the MCX-2000 shows the following screen where you can specify which operation is password-locked. Select Lock ON if you want to limit access to their relevant operations.

Password-lock selection screen

1Setup

Limits access to each setup parameter available under Setup (Top Menu > Setup).

2Edit function

Limits access to all edit functions available under Library (Top Menu > Library). These functions include any edit commands from Submenu (Edit, Delete, Change, Add, Remove, New, etc.) and the BOOKMARK button operations on the remote control.

3Recording

Limits access to all recording features available under Recording (Top Menu > Recording) and the CD AUTO STORE button operations on the remote control.

4CD tray open

Limits access to the built-in CD drive and the Open/Close button operations on the remote control and MCX-2000 front panel.

5Password

Define your own password to lock off functions specified above. Your password must be up to 14 characters (case sensitive).

nIf you forgot your password, select Lock Function from System Utilities (step 1 above). Enter all uppercase “MCAST” in the password entry dialog box, and then select OK. This resets the password to its factory setting (mcx-2000), and you can enter the password-lock selection screen. In addition, the password will also be reset if you reset the MCX-2000 (page 103).

104

MCX-2000 Owner’s Manual