Yamaha setup guide Preparation on the MCX-2000

Preparation on the MCX-2000

1Select Top Menu > Setup > Network.

2From the Network menu, select Client Registration > Auto Configuration.

3Open the Submenu in the Auto Configuration screen. Select Start from the menu.

MCX-2000 continues searching clients for 30 minutes

When the MCX-2000 starts searching available clients, register them within 30 minutes. With this screen shown on the MCX-2000, go and prepare each client.

nWhen you see the “Cannot confirm IP address” message in the screen, there is no external DHCP server that assigns IP addresses to the MCX-2000 and MusicCAST clients. In this case, the MCX-2000 automatically enters DHCP Server mode (page 37). Simply select OK in the dialog box to continue auto configuration. Select Cancel if you want to set up an external DHCP server. Auto Configuration is canceled.

32

MCX-2000 Owner’s Manual