Yamaha MCX-2000 setup guide Automatic Registration of Clients, Clients ID found in the process

Automatic Registration of Clients

Before configuring a MusicCAST network through automatic Client Registration, be sure to connect any wired clients to the network hub connected to the MCX-2000. (If you want to integrate your MusicCAST network into an existing PC network, connect both the MCX-2000 and wired clients to the PC network hub.)

1On each client, press the front panel Play button as the Auto Configuration screen is shown. Notice the client display shows the following messages in a short period.

The wired network icon indicates radio signal strength

The client is searching a wireless MusicCAST network	The client found a MusicCAST network,	The client found a MusicCAST server, waiting to be registered
	and continues searching an available MusicCAST server...

2As soon as the client display shows its ID (CL-XXXXX: a 5-digit unique number to each client), the MCX-2000 will also show the same client ID in the registration screen.

Clients (ID) found in the process

nEach client display continues showing “Press STOP to cancel” during the registration process. If you press the Stop button, the registration process for that client will be canceled. Normally, you don’t need to operate clients after you pressed the Play button in step 2.

3When the MCX-2000 found all clients, open the Submenu (Fix) in the registration screen. Select OK from the menu. The MCX-2000 shows “Saving...” and registers the clients it found. Each client display shows “Complete!” for a second.

Now that the MCX-2000 and each client recognized and memorized each other, your MusicCAST network is successfully created. Go to Applications section (page 46) and enjoy MusicCAST.

nWhen networked with the MCX-2000 for the first time, your clients must be updated before actual use (page 45).

34

MCX-2000 Owner’s Manual