Yamaha setup guide Settings on the MCX-2000

		MCX-2000			Client		Client		Client		Client
System Unique	Server/Client ID				(1)		(2)		(3)		(4)
Information
		SV-_ _ _ _ _		CL-_ _ _ _ _		CL-_ _ _ _ _		CL-_ _ _ _ _		CL-_ _ _ _ _
		DHCP Server /		DHCP Client /		DHCP Client /		DHCP Client /		DHCP Client /
		DHCP Client /		Manual		Manual		Manual		Manual
	Setting Method	Manual
		(Specify a valid IP		(Specify a valid IP		(Specify a valid IP		(Specify a valid IP		(Specify a valid IP
		address below		address below		address below		address below		address below
		with Manual.)		with Manual.)		with Manual.)		with Manual.)		with Manual.)
	IP Address (when
	DHCP is disabled)	.	. .	.	. .	.	. .	.	. .	.	. .
	Subnet Mask	.	. .	.	. .	.	. .	.	. .	.	. .
Network Settings
	Gateway Address	.	. .	.	. .	.	. .	.	. .	.	. .
	Primary DNS	.	. .		—		—		—		—
	Secondary DNS	.	. .		—		—		—		—
	NTP Server				—		—		—		—
	(only when used)
	(Server domain name
	when DNS is specified;				—		—		—		—
	Server IP address
	when DNS is not	.	. .
	specified.)
	ESS ID (up to 13
	ASCII characters)
Wireless LAN	WEP Key (up to 13
	ASCII characters)
	Channel				—		—		—		—

nIf you have more than 4 clients, copy the blank chart above and substitute the appropriate client numbers as needed.

Settings on the MCX-2000

1Select Top Menu > Setup > Network > Advanced Settings.

Advanced Settings menu

2From the above menu, select IP Address or Wireless LAN as needed, and set up the relevant parameters shown in the screen.

nIf you reconfigure your MusicCAST network because you have changed the target PC network configurations, you may want to clear existing MCX-2000 network settings using the Network Settings Reset command from the above menu (page 100).

36

MCX-2000 Owner’s Manual