Yamaha MD4S owner manual Press the TOC Write button to update the TOC

Quick search functions 63

2. Press the TOC WRITE button to update the TOC.

Note: If you turn off the power of the MD4S without updating the TOC, the marker settings will be lost.

Locating to a marker

3.Use the MARK SEARCH[]/[] buttons to locate to a marker you inserted.

The MARK SEARCH [ ] button will locate to a marker earlier than the current location, and the MARK SEARCH [] button will locate to a marker after the current location. The MD4S will then enter playback-pause mode. If no marker has been inserted, the MARK

SEARCH [] button will locate to the start marker (the beginning of the song), and the MARK SEARCH [] button will locate to the end marker (the end of the song).

Current location

Start marker Marker 1 Marker 2 Marker 3 End marker

Tip: The marker indicator in the display shows the marker that corresponds to the current location. When an indicator for a marker you inserted is blinking, the current location is between that marker and the next marker.

Current location

Start marker Marker 1 Marker 2 Marker 3 End marker

Marker indicator S 1 2 3 E

Adjusting the location of a marker or auto punch-in/out point

Here’s how you can make fine adjustments in steps of a single frame to the location of a marker or an auto punch-in/out point. This procedure can be performed when the MD4S is stopped or when it is in playback-pause mode.

1.Press a MARK SEARCH button or a LAST REC SEARCH button to locate to the marker or auto punch-in/out point whose location you wish to adjust.

2.Press the ADJUST button.

If you pressed a MARK SEARCH button in step 1, the display will indicate “MARK X:ADJST” (X will be the number of the marker that you selected), and “MARK X” will be blinking. If you pressed a LAST REC SEARCH button, the display will indicate “IN:ADJST” (auto punch-in point) or “OUT:ADJST” (auto punch-out point). At this time you can rotate the DATA dial to select another marker or auto punch-in/out point.

—Owner’s Manual