Yamaha MD4S owner manual Moving a song Song Move

Editing functions 81

Song 1

before combining

S 1 E

Song 2

before combining

S 1 2 3 E

Song 1

after combining

S 1 2 3 4 5 E

Point at which songs were joined

Note: If the total number of markers in the song (including the marker added at the point where the songs were joined) is eleven or more, it will not be possible to recall the eleventh or subsequent markers. However the locations of the eleventh and subsequent markers will still be remembered, and if one or more of the first ten markers is deleted, these later markers will once again become available. For the procedure of deleting a marker, refer to page 65.

Note: When you combine a song, the numbers of subsequent songs will be updated automatically. For example if you combine songs 1 and 2 into song 1, the following song number 3 will be renumbered as song number 2.

Moving a song (Song Move)

Song Move is a function that moves a song to a blank area. This is convenient when you wish to record additional material to extend a previously-recorded song, or to organize the blank area on a disc.

1.Use the SONG SEARCH buttons to select the song that you wish to move.

2.Press the EDIT button, rotate the DATA dial to make the display read “Song Move,” and press the ENTER button.

The display will ask “Move X?” (X is the number of the song that will be moved). At this time you can rotate the DATA dial to select a different song.

3.Press the ENTER button.

The display will read “Move to BX” (X is the number of the blank area to which the song will be moved).

4.Rotate the DATA dial to select the blank area to which the song will be moved.

Note: It will not be possible to select a blank area that is shorter than the song being moved.

—Owner’s Manual