Yamaha MD4S Start recording, Listen to the recording, Press the Play button to begin recording

Overdubbing 31

■Simultaneously monitoring the recording source and the track playback

6While playing the audio source that you wish to record, raise the CUE LEVEL control of input channel 2.

Use the CUE LEVEL control of input channel 2 to adjust the monitor level of the signal that will be recorded on track 2. While listening to the sound in your headphones or monitor speakers, adjust the monitor level as desired. If you begin record- ing now, the playback sound from track 1 will be mixed with the track 2 recording source, and can be monitored via the CUE bus.

■Start recording

7Press the PLAY button to begin recording.

When you finish recording, press the STOP but- ton.

■Listen to the recording

8Press the LAST REC SEARCH [IN] button to move to the location where you began recording track 2.

If you wish to start listening from the beginning of the song, press the SONG SEARCH [ ] button.

9Press the PLAY button to playback, and listen to the recording.

0If you are satisfied with the recording, press the REC SELECT 2 button.

The track 2 track recording indicator (DIR) will go dark.

Go ahead and record the remaining tracks 3 and 4 by overdubbing in the same way.

2

GAIN	1
LINE	MIC
MIC/
LINE	PB
	FLIP
CUE
L	R
	L
	E
	V
	E
	L
0	10
HIGH
–15	+15
MID
–15	+15
LOW
–15	+15
AUX
1	2
PAN
L	R
10
9
8
7
6
5
4
3

2

1

0

1

GAIN	2
LINE	MIC
MIC/
LINE	PB
	FLIP
CUE
L	R
	L
	E
	V
	E
	L
0	10
HIGH
–15	+15
MID
–15	+15
LOW
–15	+15
AUX
1	2
PAN
L	R
10
9
8
7
6
5
4
3

2

1

0

2

CUE bus

MONITOR

OUT

L

PHONES

R

Track 1

Track 2

Track 3

Track 4

Signal flow during overdubbing

—Owner’s Manual