Yamaha MD4S owner manual Rear panel

Front and rear panel 23

Rear panel

MONITOR STEREO

TRACK

POWER

AC IN

AUX SEND

OUT

OUT

2TR IN

DIRECT OUT

MIDI

ON/ OFF

1

2

L

L

L

3

1

THRU

OUT

IN

			R R R	4	2
		3	4 5 6	7	8
1	2

CAUTION

TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO

WIDE SLOT, FULLY INSERT.

A POWER switch

This switch is used to turn the MD4S on and off.

B AC IN

Connect the included power cable here.

C AUX SEND 1, 2 jacks

These are 1/4" phone jacks that output the signals from the input channels as adjusted by the AUX controls (input channel 5). Normally they are used as effect send jacks to send signals to external effect processors (page 45).

D MONITOR OUT jacks

These are RCA phono jacks that output the monitor signal selected by the MONITOR SELECT switch (monitor/master J). Connect them to your hi-fi system or to amplified monitor speakers.

E STEREO OUT jacks

These are RCA phono jacks that output the signal of the ST bus that has passed through the STEREO fader (monitor/master L). During mixdown, connect these jacks to the inputs of your master recorder.

F 2TR IN jacks

These are RCA phono jacks for connecting a line-level stereo device. Normally they are connected to the output jacks of your DAT or other master recorder.

G TRACK DIRECT OUT 1–4 jacks

These are RCA phono jacks which individually output the signals from tracks 1–4 (the signals currently being recorded/played). Normally they are used to connect the MD4S to the input jacks of a large mixer when you wish to use an external mixer to mix the playback of the MD4S recorder tracks.

—Owner’s Manual