Yamaha MD4S owner manual Press the Play button to begin Program Play

72 Advanced recording techniques

With the program shown in the following diagram, playback will occur in the order of Song 1

→Song 3 → Song 2 → Song 2.

Program Play

S 1: 1

S 2: 1→ 3

S 3: 3→ 2

S 4: 2→ 2

S 5: 2→ 9

S 6: 9→ 5

S 7: 5→ 1

S 8: 1→ *

S 9: *→ *

S10: *→ *

S11: *→ *

•	•
•	•
•
•

6.After you have entered all of the desired steps, press the ENTER button.

The display will show the first step (S1), and the MD4S will be in Program Play playback- pause mode. (In Program Play, the S for “Step” will be show as an uppercase character.) At this time, you can use the SONG SEARCH buttons to change the step at which Program Play will begin.

7.Press the PLAY button to begin Program Play.

When all steps have finished playing back, the MD4S will stop. By pressing the STOP button during Program Play, you can also cancel Program Play and stop.

Tip: If you press the PAUSE button during Program Play, the playback will pause temporarily, and you can use the PLAY button to resume Program Play. While paused, you can also use the SONG SEARCH buttons to change the step from which Program Play will resume.

Note: Program Play settings are remembered even when the MD4S is turned off.

—Owner’s Manual