Manuals / Brands / Home Audio / Stereo System / Yamaha / Home Audio / Stereo System

Yamaha RX-V793 For Custom Installer, English, AC* OUTLET(S) (SWITCHED), *GND terminal (For turntable use), REMOTE CONTROL (IN, OUT) terminals, GND, STANDBY, SWITCHED

1 59

Download 59 pages, 918.95 Kb

1

AC* OUTLET(S) (SWITCHED)(U.S.A., Canada, Singapore, China and General models)

.........................................................	2 SWITCHED OUTLETS
(Australia model) .................................	1 SWITCHED OUTLET

Use these to connect the power cords from your components to this unit.

The power to the SWITCHED outlets is controlled by this unit’s STANDBY/ON switch or the provided remote control transmitter’s SYSTEM POWER ON and STANDBY keys. These outlets will supply power to any component whenever this unit is turned on.

The maximum power (total power consumption of components) that can be connected to the SWITCHED AC OUTLET(S) is 100 watts.

2

*GND terminal (For turntable use)

Connecting the ground wire of the turntable to the GND terminal will normally minimize hum, but in some cases better results may be obtained with the ground wire disconnected.

English

nCONNECTING TO VIDEO AUX TERMINALS (ON THE FRONT PANEL)

These terminals are used to connect any video input source such as a camcorder to this unit.

VIDEO AUX

S VIDEO	VIDEO	L AUDIO	R

AUDIO OUT R AUDIO OUT L VIDEO OUTS VIDEO OUT

R

L

VIDEO

Camcorder

S VIDEO

For Custom Installer For U.S.A., Canada and Australia models onlyREMOTE CONTROL (IN, OUT) terminals

These terminals are used for custom installation system.
When this unit is connected to the components for custom
installation system, you can operate this unit with the	GND	REMOTE CONTROL		PCM/	DIGITAL IN
system remote control.		IN	OUT	(AC-3 DIGITAL IN)
system remote control.		IN	OUT	OPTICAL	COAXIAL
Connect the REMOTE CONTROL IN terminal of this unit to	Ω UNBAL.			DVD/LD	DVD/LD
Connect the REMOTE CONTROL IN terminal of this unit to	Ω UNBAL.
the output terminal of the central controller for custom		ON SCREEN SELECTOR
installation system.			S VIDEO VIDEO
installation system.
By connecting the REMOTE CONTROL OUT terminal of
this unit to the REMOTE CONTROL IN terminal of the other	S VIDEO SIGNAL				VIDEO
component, you can also operate it with the system remote	MONITOR	IN	VCR	MONITOR	DVD/LD
control. In this way, up to 6 components can be connected	OUT	IN	OUT	OUT

in series.

11

Contents

Natural Sound AV Receiver Récepteur audiovisuel “Son Naturel” OWNER’S MANUAL MODE D’EMPLOI SAFETY INSTRUCTIONS CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE We Want You Listening For A Lifetime (for US customers only) CONTENTS SUPPLIED ACCESSORIES FEATURES CAUTION : READ THIS BEFORE OPERATING YOUR UNIT 3.Never open the cabinet. If something drops into the set, contact your dealer Always set the VOLUME control to 12.AC outlet 13.Voltage Selector (China and General Models only) NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range 30° Battery replacement PROFILE OF THIS UNIT Digital Sound Field Processing Dolby Pro Logic Surround Dolby Digital (AC-3) Dolby Surround + DSP (CINEMA DSP) Dolby Pro Logic + 2 Digital Sound Fields Dolby Digital (AC-3)+ 3 Digital Sound Fields SPEAKER SETUP SPEAKERS TO BE USED SPEAKER CONFIGURATION SPEAKER PLACEMENT Main speaker Center speaker Rear speaker Subwoofer CONNECTIONS CONNECTIONS WITH OTHER COMPONENTS AC* OUTLET(S) (SWITCHED) (U.S.A., Canada, Singapore, China and General models) 2 SWITCHED OUTLETS For Custom Installer REMOTE CONTROL (IN, OUT) terminals These terminals are used for custom installation system When this unit is connected to the components for custom installation system, you can operate this unit with the nCONNECTING TO DIGITAL (OPTICAL AND COAXIAL) TERMINALS DIGITAL OUT ANALOG Notes on connecting with an LD player equipped with an AC-3RF output nCONNECTING TO S VIDEO SIGNAL TERMINALS S VIDEO SIGNAL S VIDEO SIGNAL VCR IN OUT S VIDEO SIGNAL MONITOR OUT CONNECTING SPEAKERS How to Connect: nOUTPUT terminals (for driving speakers with external amplifiers) nIMPEDANCE SELECTOR switch ANTENNA CONNECTIONS CONTROLS AND THEIR FUNCTIONS ABASS EXTENSION switch BTONE BYPASS switch Preset station number selector buttons Select a preset station number (1 to 8) DTone controls DISPLAY PANEL 70mm A B 1Multi-informationdisplay 6Signal-levelmeter ADJUSTMENTS BEFORE USING THIS UNIT METHOD OF CHANGING SELECTIONS TIME/LEVEL·SET MENU SPEAKER BALANCE ADJUSTMENT Set to the “∞ ” position 2 Turn the power on 3 Select the main speakers to be used *If you use two main speaker systems, press both the A and B switches 8 Turn up the volume Main (L) Center Main (R) Rear (R) ADJUSTMENTS IN THE “SET MENU” MODE DESCRIPTIONS OF THE FUNCTIONS 1.CENTER DELAY (Adjusting the delay of center sounds (dialog etc.)) Control range: 0 ms to 5 ms (in 1 ms step) Preset value: 0 ms This adjustment is effective only when the Dolby Digital BASIC OPERATIONS TO PLAY A SOURCE Switching the input mode (for DVD/LD and TV/DBS) When you finish using this unit Notes on using the input selector buttons To select the source connected to the The selection of TO RECORD A SOURCE TO TAPE (OR MD) 1 Select the source to be recorded 2 Play the source and then turn the VOLUME control up to confirm the input source. (For detailed information on the tuning operations, refer to the page 32.) Selecting the SPEAKER system Adjusting the BALANCE control Adjusting the BASS and TREBLE controls Using the TONE BYPASS switch TUNING OPERATIONS PRESET TUNING MANUAL PRESET TUNING AUTOMATIC PRESET TUNING EXCHANGING PRESET STATIONS USING DIGITAL SOUND FIELD PROCESSOR (DSP) PLAYING A SOURCE WITH AN EFFECT OF THE DIGITAL SOUND FIELD PROCESSOR (DSP) Lights up when the Digital Sound Field Processor is turned on 3 DIGITAL DSP PRO LOGIC Lights up when the Dolby Pro Logic Surround is being decoded If the input signals of source encoded with the Dolby Digital (AC are in ADJUSTING DELAY TIME AND EACH SPEAKER OUTPUT LEVEL Note D E L A Y C E N T E R R S U R Page BRIEF OVERVIEW OF DIGITAL SOUND FIELD PROGRAMS TV SPORTS STADIUM DISCO ROCK CONCERT JAZZ CLUB SETTING THE SLEEP TIMER REMOTE CONTROL TRANSMITTER BASIC OPERATIONS (When the lid is open) Page LEARNING NEW CONTROL FUNCTIONS (When the lid is open) USING OPERATION CONTROL KEYS (When the lid is closed) MUTE Examples of operations controlled by using the OPERATION CONTROL keys To operate a Yamaha CD player To operate your VCR Selected input selector MACRO OPERATIONS (When the lid is closed) Function of the key (and area) which operates when a macro key is pressed Macro key 1st 2nd 3rd LEARNING A NEW FUNCTION MAKING A NEW MACRO CLEARING LEARNED FUNCTIONS TROUBLESHOOTING FM stereo reception is noisy cannot be obtained even with a good FM antenna A desired station cannot be tuned in with the automatic tuning method SPECIFICATIONS AUDIO SECTION SECTION AUDIO