ADJUSTING DELAY TIME AND EACH SPEAKER OUTPUT LEVEL

In using the digital sound field processor including the Dolby Pro Logic Decoder or the Dolby Digital (AC-3) Decoder, you can adjust delay time between the main sound and effect sound, and each speaker output level as you prefer.

Note: These adjustments can be made only when the effect sound is on. If none of the indicators DSP , DIGITAL and PRO LOGIC are not illuminated on the display panel, press

the EFFECT switch on the front panel or the EFFECT ON/OFF key on the remote control transmitter so that at least one of those indicators lights up on the display panel.

D E L A YC E N T E RR S U R .L S U R .S W F RMethod of adjustment

If you will use the remote control transmitter, set the TIME/LEVEL·SET MENU switch to the TIME/LEVEL position on the remote control transmitter.

Note: Be sure to use the remote control transmitter with thelid open.

TIME/LEVEL

SET MENU

1 Press once or more until the name of item on which you will make an adjustment appears on the display panel.

Remote control

Front panel

DELAY/CENTER SET /REAR/SWFR MENU

or

Whenever pressed, the selection changes as the above chart shows.

*Pressing the key on the remote control transmitter changes the selection in the reverse order.

*Depending on a mode of this unit, you cannot select all items.
(Delay time)(Center speaker output level)(Right rear speaker output level)(Left rear speaker output level)(Subwoofer output level)2 Adjust the level on the selected item.

Front panel

Remote control

DELAY/CENTER SET /REAR/SWFR MENU

or

3 Repeat step 1 and 2 to make adjustments on other items.

38