Yamaha RX-V793 LEARNING A NEW FUNCTION, About, LEARN, Notes, control, (2–4in.), Lights up, Flashes slowly, begins flashing slowly, a mechanical pencil, etc.)

LEARNING A NEW FUNCTION

1 Place this remote control transmitter and the other remote control transmitter so that they face each other.

This remote control transmitter

	Other remote
	control
	About 5
	(2–4 in.)
2
	TRANSMIT
	/LEARN
CLEAR LEARN MACRO
(Press by using the point of	Flashes slowly.
a mechanical pencil, etc.)

*If there is no operation for about 30 seconds after the LEARN button is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled. If this occurs, repeat this step.

3 If necessary, select the memory area by using the A/B/C switch on the side panel of the remote control transmitter.

4 Press the key on this remote control transmitter in which you will store a new function.

Lights up.

*which cannot learn another function is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled. If this occurs, repeat this step.

*If there is no operation for about 30 seconds after a key is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the mode before you began learning operations is restored. If this occurs, restart from step 2.

5 Press and hold the key (on the other remote control transmitter) which has the function you want to store.

is finished, the TRANSMIT/LEARN indicator lighting. You can release the key. Then the indicator

begins flashing slowly.

*If a signal is not successfully received, the TRANSMIT/LEARN indicator flashes rapidly and the mode prior to step 4 is restored. If this occurs, restart from step 4.

*If memory capacity is full, the TRANSMIT/LEARN indicator flashes rapidly to show you that learning is impossible, and then the mode before you began learning operations is restored.

6 Repeat step 3–5 to store more functions.7 When you finish the learning operation, press the LEARN button.

CLEAR LEARN MACRO

Notes

●Newly learned functions will replace previously learned functions.

●If there is no more room in the memory area for a function to be learned, the TRANSMIT/LEARN indicator will flash rapidly. In this case, even if some keys are not occupied with functions from other remote control transmitters, no further learning is possible.

●If the lid is closed while learning and about 5 seconds pass, the TRANSMIT/LEARN indicator flashes rapidly and the mode before you began learning operations is restored. If this occurs, restart from step 2. However, if the lid is opened within 5 seconds, the mode before the lid was closed is restored.

●There may occasionally be instances in which, due to the signal-coding and modulation employed by the other remote control transmitter, this remote control transmitter will not be able to “learn” its signals.