Yamaha RX-V793 LEARNING NEW CONTROL FUNCTIONS (When the lid is open), +10, +10, VCR, Note, TEST, TEST, Note, Empty, Empty, Empty, Empty, Empty, Preset with, Preset with

LEARNING NEW CONTROL FUNCTIONS (When the lid is open)

This is a learning remote control transmitter. The shaded keys in the illustration shown below can be programmed to “learn” control functions from other remote control transmitters. By learning key-functions from other remote control transmitter, this unit can then be used in place of one or more other remote control transmitters, thus making operation of your various audio and video components more convenient.

Some of the “learning-capable” keys are originally empty and others have already been preset with functions to control this unit and other Yamaha components. You can store new functions to them (in place of preset functions) as desired.

*See page 50 for the learning method.*See page 52 for clearing a learned function (or all learned functions).

Note

If the memory capacity of the remote control transmitter becomes full, no further learning is possible even if some learning-capable keys are not occupied with new functions. If, for example, you store Yamaha codes only into this remote control transmitter, up to about 20 functions can be stored. Store new functions to the learnable-capable keys which are useful for you.

English

	*1
		TRANSMIT
		/LEARN
CLEAR	LEARN	MACRO
REC/PAUSE		A/B
		TAPE

Keys which can have three functions (1, 2, 3, 4)

In the “Learning-capable” keys, the keys numbered1–4in the illustration at left can have three functions. This is because they have three memory areas (A, B and C). (One function per area.) You can store new functions into the area B and C, and use three functions on a key by switching the memory areas with the A/B/C switch. (Area A cannot learn a new function.)

1

2

3

4

			A
			CD
			TUNER
A	DIR	B	VCR
STOP		DISC	B
			DVD/LD
			TV/DBS
			C
PRESET		A/B/C/D/E
DIGITAL/	ENHANCED	MOVIE
PRO LOGIC		THEATER
1	2	3	V-AUX
TV	STADIUM	DISCO
SPORTS
4	5	6	PHONO
ROCK	JAZZ CLUB	CHURCH
7	8	9	EFFECT
HALL	+10	TEST	ON/OFF
0

A/B/C switch

2

To use these keys:

1.Before using a key, select the area A, B or C of the key on which the function you want to use is stored by using the A/B/C switch.

2.Press the key.The original factory settings of these keys are as follows.

	The position of A/B/C switch
	A	B	C
	Preset with	Empty	Empty
1 functions for
	controlling a
	Yamaha tape deck.
	Preset with	Empty	Preset with functions
	functions for		for controlling a
2 controlling a			Yamaha LD player
	Yamaha CD player.		and DVD player.
	(STOP is empty.)		(DISC is empty.)
	Preset with	Empty	Empty

TIME/LEVEL

DELAY

CENTER

REAR

SWFR

SET MENU

SLEEP

SYSTEM

MASTER VOLUME

3 functions for
controlling
the built-in tuner.
Preset as the DSP	Preset as the DSP	Preset as the DSP
program selector	program selector	program selector

1

POWER ON

TV

MUTE

VCR

STANDBY

4 keys (1–9, 0) and	keys (1–9, 0) and	keys (1–9, 0) and
the TEST key.	the TEST key.	the TEST key.
(+10 is empty.)	(+10 is empty.)	(+10 is empty.)

Note

The area A of all keys cannot learn new functions. To store new functions to these keys, store them onto the area B or C.

REMOTE CONTROL TRANSMITTER

Lid is open.

1

:These buttons are used for learning a new function

*or clearing a learned function (or all learned functions). For details, refer to page 50 to 52 .

Empty keys (1, 2)

These are empty keys. Each key can learn a function from another remote control transmitter.

For example, the TV key is useful for storing the function of your TV’s power switch, and the VCR key can be used for your VCR’s power switch.

45