If your DVD (LD) player, TV/satellite tuner, etc. are equipped with coaxial or optical digital audio signal output terminals, they can be connected to this unit’s COAXIAL and/or OPTICAL digital signal input terminals.
To make a connection between optical digital audio signal terminals, remove the cover from each terminal, and then connect them by using a commercially available optical fiber cable that conforms to EIAJ standards. Other cables might not function correctly.
Even if you connect an audio/video unit to the OPTICAL (or COAXIAL) terminal of this unit, you must keep the unit connected with the same named analog audio signal terminals of this unit, because digital signal cannot be recorded by a tape deck or VCR connected to this unit. You can switch the selection of input signals between “digital” and “analog” easily. (See page 29 for details.)
Notes
●When connecting an audio/video unit to both of the digital and analog terminals of this unit, make sure to connect to both terminals of the same name.
●Be sure to attach the covers when the OPTICAL terminals are not being used, in order to protect the terminals from dust.
●All digital audio signal input terminals are applicable to the sampling frequency of 32 kHz, 44.1 kHz and 48 kHz.
|
| COAXIAL |
|
|
|
DVD (LD) player |
| DIGITAL OUT | TV/Satellite tuner |
| |
|
|
| |||
|
|
|
|
|
|
| ANALOG | OPTICAL | COAXIAL | ANALOG | ||
OUT | DIGITAL | DIGITAL | OUT | ||
| OUT | OUT |
|
| |
GND | REMOTE CONTROL | PCM/ | DIGITAL IN | |
| IN | OUT | ||
|
|
| OPTICAL | COAXIAL |
75Ω UNBAL. |
|
| DVD/LD | DVD/LD TV/DBS |
|
|
|
| |
|
| ON SCREEN SELECTOR |
|
|
|
| |
|
|
| S VIDEO VIDEO |
|
|
|
|
FM |
|
|
|
|
|
|
|
ANT |
|
|
|
|
|
|
|
| S VIDEO SIGNAL |
| VIDEO SIGNAL |
| |||
| MONITOR | IN | VCR | MONITOR | DVD/LD | TV/DBS | VCR |
GND | OUT | OUT | OUT |
| IN | OUT | |
|
|
|
|
|
|
| |
AM |
|
|
|
|
|
|
|
ANT |
|
|
|
|
|
|
|
|
|
| AUDIO SIGNAL |
|
|
| |
PHONO | CD |
| TAPE/MD | DVD/LD | TV/DBS | VCR | |
|
|
| TAPE PB REC OUT |
| IN | OUT | |
1 | 3 | 4 |
(U.S.A. model)
12