Yamaha RX-V793 Selecting the SPEAKER system, Adjusting the BALANCE control, Adjusting the BASS and TREBLE controls, Using the TONE BYPASS switch

Selecting the SPEAKER system

Because one or two speaker systems (as main speakers) can be connected to this unit, the SPEAKERS switches allow you to select speaker system A or B, or both at once.

SPEAKERS

A B

Adjusting the BALANCE control

Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions.

BALANCE

l	0	l
2		2
3		3
4		4
L 5		5 R

Note

This control is effective only for the sound from the main speakers.

Adjusting the BASS and TREBLE controls

BASS				TREBLE
l	0	l		l	0	l
2			2	2		2
3			3	3		3
4			4	4		4
5		5		5		5

BASS : Turn this clockwise to increase (or counterclockwise to decrease) the low frequency response.

TREBLE : Turn this clockwise to increase (or counterclockwise to decrease) the high frequency response.

Note

These controls are effective only for the sound from the main speakers.

	English
Using the BASS EXTENSION switch

You can boost bass frequency response by setting this switch to the “ON” position. This switch is effective only on the sound from the main speakers.

BASS TONE

EXTENSION BYPASS

ON OFF

Using the TONE BYPASS switch

Press this switch inward (ON) if you want to listen to pure source sound. The input signal does not pass through the tone (BASS and TREBLE) control circuitry so that it is unaffected by the tone control circuitry. Press this switch to release it outward (OFF) to use the tone control circuitry.

BASS TONE

EXTENSION BYPASS

ON OFF

31