1Tape deck keysControls tape deck.

(The A/B/C switch (F) should be set to the “A” position.) * DIR A, B and A/B are applicable only to double

cassette tape deck.

* For a single cassette deck with automatic reverse function, pressing DIR A will reverse the direction of tape running.

2CD/LD/DVD player keysControls compact disc player, LD player or DVD player.

(To control compact disc player, set the A/B/C switch (F) to the “A” position. To control LD player or DVD player, set the A/B/C switch (F) to the “C” position.)

*DISC is applicable only to compact disc changer.*STOP is applicable only to LD player or DVD player.3Tuner keysControls tuner.

(The A/B/C switch (F) should be set to the “A” position.) +: Selects higher preset station number.

–: Selects lower preset station number.A/B/C/D/E: Selects the group (A – E) of preset station numbers.4DSP program selector keys

Selects a DSP program when the built-in digital sound field processor (including the Dolby Pro Logic Surround decoder and the Dolby Digital (AC-3) decoder) is on.

5TEST keyUsed for speaker balance adjustment. (For details, refer to page 24–25.)6TIME/LEVEL·SET MENU switch

Set to the TIME/LEVEL position when you will make an adjustment on delay time, center speaker output level, rear speaker output level or subwoofer level. Set to the SET MENU position when you will make an adjustment or setting change on a function in the SET MENU mode.

7SLEEP timer key

This key is used to turn the built-in SLEEP timer on and off, and to set the SLEEP time. (For details, refer to page 42.)

8SYSTEM POWER ON and STANDBY keys

Pressing the SYSTEM POWER ON key turns the power to this unit on and pressing the STANDBY key turns this unit into the standby mode.

9RESET buttonThis button is inside the battery compartment.

Press this button to “reset” the internal microcomputer which controls remote control operations. Microcomputer “reset” is necessary when the remote control freezes.

*Pressing the RESET button will not erase learned functions.

RESET button

0MASTER VOLUME (up) and (down) keys Turns the volume level up and down.AMUTE key

When pressed, this key mutes the volume level. To resume the original volume level, press this key again.

While muting, the indicator on the VOLUME control flashes continuously.B / and –/+ keys

(up) and (down) keys change items (or functions) in the mode selected by the TIME/LEVEL·SET MENU switch. – and

+keys make an adjustment or setting change on the item (orfunction) selected by the or key.CEFFECT ON/OFF key

Switches on/off the digital sound field processor (including the Dolby Pro Logic Surround decoder and the Dolby Digital (AC- 3) decoder).

DInput selector keys Selects input source.EA/B/C indicatorsThe position (A, B or C) selected by the A/B/C switch is shown in red.FA/B/C switch

This switch must be used only when the lid of the remote control transmitter is open. (This switch will not function when the lid is closed.)

Normally, set this switch to the “A” position. When controlling a Yamaha LD player or DVD player by using the CD/LD/DVD player keys (2), set this switch to the “C” position.

GTRANSMIT/LEARN indicator

Lights up when the remote control transmitter is transmitting infrared signals (when a command key is pressed).

Note

When using the keys to control Yamaha components, identify them with your component’s keys. If these keys are identical, their functions will be the same. For each key function, refer to the corresponding instruction in your component’s manual.

44