SETTING THE SLEEP TIMER

If you use the SLEEP timer of this unit, you can make this unit turn into the standby mode. When you are going to sleep while enjoying a broadcast or other desired input source, this timer function is helpful.

Notes

●The SLEEP timer can be controlled only with the remote control transmitter.

●The components on which the SLEEP timer is effective are the sources connected to the SWITCHED AC OUTLET(S) on the rear panel of this unit.

To set the SLEEP time

1

SLEEP

Press once or more to select the desired

SLEEP time.

Indicates the SLEEP time.

SLEEP

Flashes.

Whenever the SLEEP key is pressed, the SLEEP time will change as follows.

(Minutes)

120 90 60 30

The SLEEP timer is off (OFF). (The state before the SLEEP key is pressed.)

After a while, the display returns to the indication before the SLEEP timer is set.

2 The unit will be turned into the standby mode automatically at the selected SLEEP time.

To cancel the selected SLEEP time

SLEEP

Press once or more so that “SLEEP OFF” appears on the display. (It will soon disappear and the “SLEEP” indicator will go off from the display.)

Note

The SLEEP timer setting can also be canceled by turning this unit into the standby mode with the STANDBY/ON switch on the front panel (or the STANDBY key on the remote control transmitter) or disconnecting the power plug of this unit from the AC outlet.

42