Yamaha RX-V793 SPEAKER SETUP, SPEAKERS TO BE USED, SPEAKER CONFIGURATION, WIDE, Note:, Note:, (AC-3), NORMAL, Main L, Center, Main R, (AC-3), Main L, Main R, Rear L, Rear R

SPEAKER SETUP

SPEAKERS TO BE USED

This unit is designed to provide the best sound-field quality with a 5 speaker configuration, using main speakers, rear speakers and a center speaker.

The main speakers are used for the main source sound plus the effect sounds. They will probably be the speakers from your present stereo system. The rear speakers are used for the effect and surround sounds, and the center speaker is for the center sounds (dialog, vocals, etc.). If for some reason it is not practical to use a center speaker, you can do without it. Best results, however, are obtained with the full system.

The main speakers should be high performance models and have enough power handling capacity to accept the maximum output of your audio system.

Other speakers do not have to be equal to the main speakers. For precise sound localization, however, it is ideal to use high performance models that can reproduce sounds in full range for the center speaker and the rear speakers.

Use of a subwoofer expands your sound field

It is also possible to further expand your system with the addition of a subwoofer and amplifier. The use of a subwoofer is effective not only for reinforcing bass frequencies from any or all channels, but also for reproducing the LFE (low frequency effect) sound with high fidelity when playing back a source with the Dolby Digital (AC-3) decoded. You may wish to choose the convenience of a Yamaha Active Servo Processing Subwoofer System, which has its own built-in power amplifier.

SPEAKER CONFIGURATION

5-Speaker Configuration

This configuration is the most effective and recommended one. When playing back a source using the DSP program,

DIGITAL (PRO LOGIC), DIGITAL (PRO LOGIC)

ENHANCED, DIGITAL (70 mm) MOVIE THEATER or TV SPORTS, or when playing back a source which contains center-channel signals (dialog, vocals, etc.) using any DSP program with the Dolby Digital (AC-3) decoded, conversations will be output from the center speaker and the ambience will be excellent.

Note: Set the CENTER SPEAKER mode to the “NORMAL” or “WIDE” position. (For details, refer to page 22.)

Main L Center Main R

Dialogue

4-Speaker ConfigurationThe center speaker is not used in this configuration. Whenplaying back a source using the DSP program, DIGITAL

(PRO LOGIC), DIGITAL (PRO LOGIC) ENHANCED, DIGITAL (70 mm) MOVIE THEATER or TV SPORTS, or when playing back a source which contains center-channel signals (dialog, vocals, etc.) using any DSP program with the Dolby Digital (AC-3) decoded, the center sound is output from the left and the right main speakers. However, the sound effect of other programs can be the same as that of the 5-speaker configuration.

Note: Be sure to set the CENTER SPEAKER mode to the “PHANTOM” position. (For details, refer to page 22.)

Main L Main R

Dialogue

Surround sound		Surround sound
Rear L	Rear R	Rear L	Rear R

8