SW1000XG Overview
and Features
Sound Module Modes
The SW1000XG features both XG and TG300B sound module modes. Normally, the SW1000XG plays in XG mode. However, since it automatically recognizes which mode to select based on incoming MIDI data, you can easily change the mode by MIDI System Exclusive messages that you program in sequencer data, at the head of your composition.
nTurning on the power of your computer with the SW1000XG sound card installed will automatically initialize all SW1000XG settings, or parameter values.
nSince the SW1000XG requires about half a second to change modes when it receives a mode change message, be sure to insert at least one blank measure at the top in order to allow enough time for the mode to change before your actual music data begins.
XG ModeIn XG mode the SW1000XG will play
In TG300B mode the SW1000XG will play multitimbral music data created for
•Play up to 32 Parts + 14 Audio Parts.
•Choose from 614 Normal Voices and 10 Drum Voices.Voices
An SW1000XG Voice can be made up of one or two elements (i.e., sounds), depending on the complexity of the Voice. Many Voices are made up of only one element.
The number of elements in use determines the maximum number of simultaneous notes (polyphony) which the SW1000XG can play at any given time, depending on the amount of incoming MIDI Note data. For details about the number of elements used in each Voice, see the XG/TG300B Normal Voice Lists of the “Data_E.pdf” file contained in the supplied
The SW1000XG has two types of
•A Normal Voice is simply a pitched Voice which can be played on a musical scale from low to high, such as a piano or trumpet. The SW1000XG has 1,267 Normal Voices.
•A Drum Voice is a complete set of drum and other percussion sounds, each sound having a fixed pitch. Each sound is assigned to a specific MIDI Note number (which also corresponds to a key on a MIDI keyboard). The SW1000XG has 46 Drum Voices.
22