Device SelectionWhen using the SW1000XG sound card, select the devices as follows:•MIDI In

Select “SW1000 MIDI IN.” When you are going to connect an external MIDI keyboard to the sound card’s MINI DIN 6 pin terminal using the included MIDI adapter cable, you can have the keyboard performance play through the SW1000XG sound card (you must select “SW1000 #1 (or #2) Synthesizer” for MIDI Thru and MIDI Out, as mentioned below).

•MIDI Thru

Select “SW1000 #1 (or #2) Synthesizer”. The MIDI signal that comes in through the MIDI In device above will be played through the SW1000XG sound card.

If “SW1000 MIDI OUT” is selected, and you have connected an external MIDI tone generator to the sound card’s MINI DIN 6 pin terminal using the included MIDI adapter cable, you can play the music through that tone generator.

n”SW1000 #1 Synthesizer” is the MIDI output device for Part numbers 1 to 16. “SW1000 #2 Synthesizer” is the MIDI output device for Part numbers 17 to 32.

•MIDI Out

Select “SW1000 #1 (or #2) Synthesizer”. The MIDI signal (performance data) that is output from XGworks will be played through the SW1000XG sound card.

If “SW1000 MIDI OUT” is selected, and you have connected an external MIDI tone generator to the sound card’s MINI DIN 6 pin terminal using the included MIDI adapter cable, you can play the music through that tone generator.

n”SW1000 #1 Synthesizer” is the MIDI output device for Part numbers 1 to 16. “SW1000 #2 Synthesizer” is the MIDI output device for Part numbers 17 to 32.

•Wave InSelect “SW1000 #1 (or #2) WAVE IN”.

“SW1000 #1 WAVE IN” is a wave input device specially for the SW1000XG sound card external audio input (A/D input).

nWhen effects are applied to the A/D input audio signal, those effects are ignored. Even when recorded on a XGworks wave track, only the raw sound is recorded.

“SW1000 #2 WAVE IN” is the wave input device for all sound heard using the SW1000XG sound card (the mixture of A/D input, XGworks wave tracks, and the sound from the AWM2 tone generator on the sound card).

nUnlike “SW1000 #1 WAVE IN”, the effect component will be input if effects are applied.

•Wave OutSelect “SW1000 #1 - #6 WAVE OUT”.

Correspondence between each wave out device (#1 - #6) and SW1000XG audio part is as follows:

SW1000 #1 WAVE OUT: Wave output is sent to the SW1000XG audio parts PCI 1 and PCI 2.

SW1000 #2 WAVE OUT: Wave output is sent to the SW1000XG audio parts PCI 3 and PCI 4.

SW1000 #3 WAVE OUT: Wave output is sent to the SW1000XG audio parts PCI 5 and PCI 6.

SW1000 #4 WAVE OUT: Wave output is sent to the SW1000XG audio parts PCI 7 and PCI 8.

SW1000 #5 WAVE OUT: Wave output is sent to the SW1000XG audio parts PCI 9 and PCI 10.

SW1000 #6 WAVE OUT: Wave output is sent to the SW1000XG audio parts PCI 11 and PCI 12.

PCI is the SW1000XG sound card’s audio part which receives wave output from the XGworks wave track. There are total of 12 PCI parts and the mixing between these PCI parts can be controlled by using the SW1000XG mixer (→ P. 32).

26