If any knob or slider is operated (clicked or dragged) while pressing the <Ctrl> key on the computer keyboard, the knobs and sliders belonging to every part that is input into the SW1000XG sound card from the external audio input (A/D input) terminal (parts that have A1 or A2 displayed in the input column) or to every part that is input into the SW1000XG sound card from an XGworks wave track (parts that have P1 to P12 displayed in the input column) will move together with it. For example, if the pan knob for the P1 part is rotated to the left while holding the <Ctrl> key, the pan knobs for all parts P2 to P12 will simultaneously rotate the same amount to the left.
If both the <Ctrl> and the <Shift> key are pressed at the same time and a control is operated (clicked or dragged), the same control belonging to every part that is input into the SW1000XG sound card from the external audio input (A/D input) terminal (parts that have A1 or A2 displayed in the input column) or to every part that is input into the SW1000XG sound card from an XGworks wave track (parts that have P1 to P12 displayed in the input column) will move together in the opposite direction. For example, if the pan knob for the P1 part is rotated to the left while holding the <Ctrl> and the <Shift> key, the pan knobs for all parts P2 to P12 will simultaneously rotate the same amount to the right.
If a control is operated (clicked or dragged) while the <Ctrl> and <Alt> keys are both being pressed, the knobs or sliders of the two parts that form a stereo pair will move together.
nThe following pairs of parts in the Input column form stereo pairs: A1 and A2, P1 and P2, P3 and P4, P5 and P6, P7 and P8, P9 and P10, and P11 and P12.
nThe value of each knob and slider can be controlled from the computer keyboard. Pressing the <Home> or <Page Up> key will increment the value (increase it). Pressing the <End> or <Page Down> key will decrement the value (decrease it).
nWhen the SW1000XG Mixer is opened, each knob and slider will always be set at its default amount. Even after changing the settings by moving the knobs and sliders, any knob or slider can be returned to its default value by simply
1
2
3
4
5
6
7
8
9
1Level Meter
Displays the audio input level for the part which is set as “A1” or “A2” in the Input (2) setting.
nDepending on the Wave In device set in the System Setup dialog (→ P. 25), the audio input level display will be as follows:
SW1000 #1 WAVE IN The level will be displayed only for the external audio input (A/D input) of the SW1000XG sound card.
SW1000 #2 WAVE IN The level will be displayed for a mixture of the A/D input, XGworks wave tracks and the sound from the AWM2 tone generator on the sound card.
2Input
Sets the type of each part’s audio signal. When you
37