■Volume is low.
•Is volume or expression set too low in the part control?
•Are the velocity sense settings in the part edit made incorrectly?
•Is the MIDI volume information not being received?
■Distorted sound/weak sound on the A/D input
• Is the input source selected correctly? (→ P. 35)
■No effects applied at all.
• Has send/return been raised sufficiently?
■Effects not applied to some parts
•Has the send level been raised sufficiently for each of the parts or drum part instruments?
■The tone is strange
• Are the bank select/program change settings made correctly?
■The pitch is strange.
• Are the master tune, transpose and note shift settings correct?
■Interruptions in the sound
•Has the maximum polyphony limit of 64 voices been exceeded? (→ P. 23)
Keep in mind that when one channel is specified for multiple parts, all the multi- ple parts will begin playing simultaneously with one Key On.
■MIDI bulk data is not being received correctly
•Is the device number specification correct?
•Was the dump interval time set too short when the data was saved?
44