Track View Window

Track Parameter Section

The Track Parameter Ch (channel) display has been changed to the Ch/Pan display, and the following function has been added:

nFor details about the Track View Window, see page 41 of the XGworks V2.0 Owner’s Manual.

nWhen using the SW1000XG sound card, set the Track Parameter Section Port displays as follows: When the track type is MIDI: SW1000 #1 (or #2) Synthesizer

When the track type is WAVE: SW1000 #1 - #6 WAVE OUT

When WAVE is selected as the track type in the TYPE display, it becomes possible to set the pan (stereo position) of the wave data in the Ch/Pan display.

nWhen MIDI is selected as the track type, the output MIDI channel is set in the Ch/Pan display.

❑Range of settings: L7-L1, C, R1-R7

Each wave out device (SW1000 #1 - #6 WAVE OUT) corresponds to two audio parts of the SW1000XG sound card. For example, wave output through the SW1000 #1 WAVE OUT is sent to the SW1000XG audio parts PCI 1 and PCI 2 (→ P. 26).

In case of monaural wave track:

Setting the Ch/Pan value to L1-L7 will send more wave data to the odd numbered PCI part (PCI 1, 3, 5, 7, 9 or 11). Setting the Ch/Pan value to R1-R7 will send more wave data to the even numbered PCI part (PCI 2, 4, 6, 8, 10 or 12). Setting the Ch/Pan value to C will send wave data equally to both odd and even numbered PCI parts.

In case of stereo wave track:

Regardless of the Ch/Pan setting, wave data will be sent equally to both odd and even numbered PCI parts.

By using the SW1000XG mixer (→ P. 32), you can control panning of each PCI part individually.

28