PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24350
Supporting the motorcycle
Since this model is not equipped with a centerstand, follow these precautions when removing the front and rear wheel or performing other maintenance requiring the motorcycle to stand up- right. Check that the motorcycle is in a stable and level position before starting any maintenance. A strong wooden box can be placed under the engine for added stability.
To service the front wheel
1.Stabilize the rear of the motorcycle by using a motorcycle stand or, if an additional motorcycle stand is not available, by placing a jack un- der the frame in front of the rear wheel.
2.Raise the front wheel off the ground by using a motorcycle stand.
To service the rear wheel
Raise the rear wheel off the ground by using a motorcycle stand or, if a motor- cycle stand is not available, by placing
a jack either under each side of the frame in front of the rear wheel or under each side of the swingarm.
EAU24360
Front wheel
EAU41810
To remove the front wheel
EWA10820
WARNING
●It is advisable to have a Yamaha dealer service the wheel.
●Securely support the motor- cycle so that there is no danger of it falling over.
1.Loosen the locknut at the brake le- ver, and then turn the adjusting bolt fully in direction (a).
6
1 2
(a)
1.Brake lever free play adjusting bolt
2.Locknut
2.Loosen the axle nut.
