PERIODIC MAINTENANCE AND MINOR REPAIR
EAU25080
Rear wheel
EAU41642
To remove the rear wheel
EWA10820
WARNING
2. Remove the brake pedal free play |
|
| 3 |
adjusting nut, and then disconnect |
|
| |
|
|
| |
the brake rod at the brake cam- | 1 | 2 | 4 |
shaft lever. |
|
|
|
●It is advisable to have a Yamaha dealer service the wheel.
●Securely support the motor- cycle so that there is no danger of it falling over.
1.Disconnect the brake torque rod from the brake shoe plate by re- moving the cotter pin, the nut and the bolt.
1.Brake rod
2.Brake pedal free play adjusting nut
3.Brake camshaft lever
4.Wheel axle
3.Loosen the locknut and the drive chain slack adjusting nut on both ends of the swingarm.
1.Axle nut
2.Washer
3.Drive chain slack adjusting nut
4.Locknut
4.Loosen the axle nut.
5. Lift the rear wheel off the ground 6 according to the procedure on page
6.Remove the axle nut and washer, and then pull the wheel axle out.
7.Push the wheel forward, and then remove the drive chain from the rear sprocket.
1.Brake torque rod
2.Cotter pin
3.Brake torque rod bolt and nut
4.Brake shoe plate
