Yamaha TT-R110EX owner manual Starting a warm engine, Shifting, To start out and accelerate

OPERATION AND IMPORTANT RIDING POINTS

EAU16640

Starting a warm engine

Follow the same procedure as for start- ing a cold engine with the exception that the starter (choke) is not required when the engine is warm.

EAU39901

Shifting

4

3

2

1

2

1

1.Shift pedal

2.Neutral position

This motorcycle has a 4-speed trans- mission with a centrifugal, automatic clutch. Shifting gears lets you control the amount of engine power available for starting off, accelerating, climbing hills, etc.

The gear positions are shown in the il- lustration.

NOTE:

To shift the transmission into the neu- tral position, press the shift pedal down repeatedly until it reaches the end of its travel.

ECA15441

CAUTION:

●Even with the transmission in the neutral position, do not coast for long periods of time with the engine off, and do not tow the motorcycle for long dis- tances. The transmission is properly lubricated only when the engine is running. Inade- quate lubrication may damage the transmission.

● Always release the throttle grip	5
before changing gears to avoid
damaging the engine, transmis-
sion, and drive train, which are
not designed to withstand the
shock of shifting when the throt-
tle grip is open.
EAU39910
To start out and accelerate

1.Close the throttle.

2.Shift into first gear and release the shift pedal.

5-2