Yamaha TT-R110EX owner manual Adjusting the brake pedal free play

PERIODIC MAINTENANCE AND MINOR REPAIR

3.If the specified brake lever free play could be obtained as de- scribed above, tighten the locknut and skip the rest of the procedure, otherwise proceed as follows.

4.Fully turn the adjusting bolt at the brake lever in direction (a) to loos- en the brake cable.

5.Loosen the locknut at the brake shoe plate.

6.To increase the brake lever free play, turn the adjusting bolt in di- rection (a). To decrease the brake lever free play, turn the adjusting bolt in direction (b).

(a)

(b)

2

1

1.Locknut

2.Brake lever free play adjusting bolt

EAU44670

Adjusting the brake pedal free play

1.Brake pedal free play adjusting nut

2.Brake pedal free play

The brake pedal free play should mea- sure 10.0–20.0 mm (0.39–0.79 in) at the brake pedal end as shown. Period- ically check the brake pedal free play and, if necessary, adjust it as follows.

To increase the brake pedal free play, turn the adjusting nut at the brake rod in direction (a). To decrease the brake pedal free play, turn the adjusting nut in direction (b).

EWA14820

WARNING

●After adjusting the drive chain slack or removing and installing the rear wheel, always check the brake pedal free play.

●If proper adjustment cannot be obtained as described, have a Yamaha dealer make this ad- justment.

6

7.Tighten the locknut at the brake shoe plate and at the brake lever.

6-18