INSTRUMENT AND CONTROL FUNCTIONS
EAU37650
Kickstarter
1
3
1. Kickstarter lever
If the engine fails to start by pushing the start switch, try to start it by using the kickstarter. To start the engine, fold out the kickstarter lever, move it down light- ly with your foot until the gears engage, and then push it down smoothly but forcefully.
EAU13960
Seat
To remove the seat
Remove the bolts, and then pull the seat off.
1
1. Bolt
To install the seat
1.Insert the projections on the front of the seat into the seat holders as shown.
1
2
1.Projection
2.Seat holder
2.Place the seat in the original posi- tion, and then tighten the bolts.
NOTE:
Make sure that the seat is properly se- cured before riding.
