Yamaha TT-R110EX Motorcycle Care and Storage, Matte color caution, Before cleaning, Cleaning

MOTORCYCLE CARE AND STORAGE

EAU37833

Matte color caution

ECA15192

CAUTION:

Some models are equipped with matte colored finished parts. Be sure to consult a Yamaha dealer for advice on what products to use be- fore cleaning the vehicle. Using a brush, harsh chemical products or cleaning compounds when cleaning these parts will scratch or damage their surface. Wax also should not be applied to any matte colored fin- ished parts.

7

EAU40462

Care

While the open design of a motorcycle reveals the attractiveness of the tech- nology, it also makes it more vulnera- ble. Rust and corrosion can develop even if high-quality components are used. A rusty exhaust pipe may go un- noticed on a car, however, it detracts from the overall appearance of a motor- cycle. Frequent and proper care does not only comply with the terms of the warranty, but it will also keep your motorcycle looking good, extend its life and optimize its performance.

Before cleaning

1.Cover the muffler outlet with a plastic bag after the engine has cooled down.

2.Make sure that all caps and covers as well as all electrical couplers and connectors, including the spark plug cap, are tightly in- stalled.

3.Remove extremely stubborn dirt, like oil burnt onto the crankcase, with a degreasing agent and a brush, but never apply such prod-

7-1

ucts onto seals, gaskets, sprock- ets, the drive chain and wheel axles. Always rinse the dirt and de- greaser off with water.

Cleaning

ECA10771

CAUTION:

●Avoid using strong acidic wheel cleaners, especially on spoked wheels. If such products are used on hard-to-remove dirt, do not leave the cleaner on the af- fected area any longer than in- structed. Also, thoroughly rinse the area off with water, immedi- ately dry it, and then apply a cor- rosion protection spray.

●Improper cleaning can damage plastic parts such as cowlings, panels, windshields, headlight lenses, meter lenses, etc. Use only a soft, clean cloth or sponge with mild detergent and water to clean plastic.

●Do not use any harsh chemical products on plastic parts. Be sure to avoid using cloths or sponges which have been in