E
NOTE:
●Wipe off any water on the spark plug or inside the cap before installing the spark plug cap. Push the spark plug cap down until it clicks.
●If a torque wrench is not available when you are fitting a new spark plug, a good estimate of the correct torque is 1/4 turn to 1/2 turn past finger tight. Have the spark plug adjusted to the correct torque with a torque wrench as soon as possible.
WARNING
Be careful not to damage the insulator when removing or installing a spark plug. A damaged insulator could allow sparks to escape, which could lead to explosion or fire.
EJU01260
Lubrication points
To keep moving parts sliding or rotating smoothly, coat them with
Recommended
●Throttle cable (carburetor end)
●Oil pump cable
●Choke cable (carburetor end)