E
EJU01222
PADLOC (Programmable digital locking ignition)
This feature is provided to deter unauthorized use.
The function allows you to choose either “START” or “LOCK” mode, as the situation requires, much as you would use an ignition key in a motor vehicle. If you have previously chosen “LOCK” mode, the engine will not start unless the right code is put in to select “START” mode.
NOTE:
If you do not use the PADLOC system, it is unnecessary to perform the initial setting of the PADLOC. In this case, the “START” mode is automatically selected.
EJU01223
PADLOC initial setting
1.Disconnect the blue connector 1 behind the front storage compartment.
2.After the warning light turns on, press the “MODE” button for at least 3 seconds until the display shows “COdE.” You are ready to set your code.